RTK Base Station

Radiolink ANT-B10

High Quality of Signal Receive and Low Delay

Accurate Directivity

Multi-star Reception

High Quality of Signal Receive and Low Delay

Anti-out-of-band Interference

Anti-out-of-band Interference

Cost-effective Solution


Accurate Directivity

The four-feed eight-pin antenna design achieved a low axial ratio, small phase center offset, and high positioning accuracy. The phase center has high stability and good repeatability, the directivity is accurate during use, and it is worry-free of movement.


Multi-star Reception

The four-feed eight-pin antenna has high gain at low elevation angles and strong tracking capability for low-elevation satellites, ensuring the measurement system has enough satellites.

RTK Rover Antenna

10KM+

RTK Basestation

RTK Receiver(RTK F9P)

Mission Planner


High Quality of Signal Receive and Low Delay

The ceramic filter and time-delay compensation circuit design are adopted to obtain accurate measurement time and improve positioning accuracy.


Anti-out-of-band Interference

The antenna adopts a front ceramic filter design and a two-stage ceramic filter design, with high out-of-band suppression, effectively suppressing out-of-band interference signals, without fear of being close to radio communication equipment, 4G/5G transmission towers, high-voltage lines, etc.


Anti-in-band Interference

The Radiolink BaseStation's ultra-low noise coefficient, high linearity LNA, and wide dynamic range make it Highly Effective against same-frequency interference.

Mission Planner

RTK Basestation

User2

User1

RTK Basestation

Internet


Fast Switching between BaseStation and Rover

The RTK base station and RTK rover use the same design and firmware. You only need to load different configuration parameters to complete fast switching.

The base station and rover use Type-C interfaces, and both ends can be switched freely.

Use as a Rover

Use as the Base Station


Cost-effective Solution


RTK kit (RTK receiver RTK F9P+ base station antenna ANT-B10+ rover antenna ANT-M7), combined with the PIX flight control series, can be used for the Radiolink automatic driving control system for agricultural machinery vehicles which support 90-degree on-the-spot steering*, or the M435 Heavy Lift Drone, etc. It can provide high-precision positioning within the communication range of the mobile station and is suitable for many professional scenarios such as agriculture, surveying and mapping, inspection, express delivery, takeout, and rescue material delivery.


Use Guarantee

With the accumulation of research and development in the past ten years, we have reanalyzed and retested all the functions of all the models including airplanes, multi-copters, helicopters, cars, and boats. All the usage guidance needed for all functions from basic use, PID parameter adjustment, log viewing, etc. of each model we can offer.

FAQ on the official website, Facebook, YouTube, Instagram, TikTok and the professional section of the forum, Radiolink is eager to help users use Radiolink products on multiple platforms.


Radiolink ANT-B10(RTK Basestation Antenna) Packing List

More Recommended Packages: ① Radiolink RTK Basestation Kit Packing List

  • ANT-B10(RTK Basestation Antenna)*1

  • ANT-B10 Connect Cable*1

  • RTK F9P(RTK Receiver)*1

  • ANT-B10(RTK Basestation Antenna)*1

  • ANT-B10 Connect Cable*1

More Recommended Packages:

② Radiolink RTK Basestation and RTK Rover Kit Packing List

  • RTK F9P(RTK Receiver)*2

  • ANT-B10(RTK Basestation Antenna)*1

  • ANT-B10 Connect Cable*1

  • ANT-M7(RTK Rover Antenna)*1

  • ANT-M7 Connect Cable*1

  • Type-C Cable(Upgrade&Parameter Set)*1

More Recommended Packages:

③ Radiolink Automatic Driving Control System for Agricultural Machinery Vehicles



  • PIX6(Flight Control)*1

  • RTK F9P(RTK Receiver)*2

  • ANT-B10(Basestation Antenna*1

  • ANT-M7(Rover Antenna)*1

  • Digital Transmission Module*2

  • ANT-B10 Connect Cable*1

  • ANT-M7 Connect Cable*1

  • Power Module(2-12S)*1

  • Buzzer * 1

  • Safety Switch * 1

  • 4G TF (MicroSD) Card* 1

  • Double-sided Adhesive Tape*2

  • CAN1/2 Port Connect Cable*2

  • DSM RC Port Connect Cable*1

  • TELEM1/2 Port Connect Cable*2

  • ADC 6V6 Port Connect Cable*1

  • ADC 3V3 Port Connect Cable*1

  • OSD Port Connect Cable*1

  • GPS1/2 Port Connect Cable*2

  • SWITCH Port Connect Cable*1

  • I2C Port Connect Cable*1

  • SPI Port Connect Cable*1

  • POWER1 Port Connect Cable*1

  • POWER2 Port Connect Cable*1

  • Debug Port Connect Cable*1

  • Receiver Connect Cable*1

  • USB Port Connect Cable*1

  • Type-C Cable(Upgrade&Parameter set)*1